ကိုတင္ေပးလိုက္ပါတယ္။ဘယ္လိုလုပ္ေဆာင္ရမယ္ဆိုတာေအာက္မွာေရးထားပါတယ္။
"The firmware is released only for the Samsung Samsung SM-W2014 model, so don't try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".
1- Check battery percentage, your device should have at least 60% battery power
2- Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
3- Backup important data and settings to external storage
4- Install USB driver for your device on your computer
1- Download Android 4.3 KEUBMK2 Firmware for Samsung SM-W2014 from the above list
2- Download Odin 3.09
3- Switch off your phone and boot Samsung SM-W2014 into Download Mode by pressing and holding the
Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode.
4- Extract the downloaded Odin3.09 zip file and run the Odin3 v3.07.exe file as an administrator
(Right click on the .exe file and click on Run as administrator)
5- Now connect your Samsung SM-W2014 to your computer via USB cable
6- In Odin3 screen, you should see a COM Port number like [COM7] at ID:COM section and Added text at
the message box. This means your device has been detected by Odin3.
7- Make sure that, only the Auto Reboot and F. Reset Time options are checked.
8- Now, extract the downloaded firmware zip file, you find a firmware file with extension .tar.md5
9- In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension
(The firmware file look something like: XXDLJ5_ODDDLI7_INU.tar.md5)
10- Now, click on the Start button to begin the installation process, wait few moments.
11- Once completed, you would see PASS! message in ID:COM port having green background
12- Your phone should automatically reboot after completion
13- You can now disconnect your phone from computer
14- Finish
★★နည္းပညာၿမိဳ႕ေတာ္★★